Get the Most Value from Your Roof Insulation

Value from Your Roof InsulationGet the Most Value from Your Roof Insulation. From fibreglass to foam, there are a variety of popular roof insulation materials. However, not all are created equal and some are more effective than others.

The basic gauge of the effectiveness of any insulation is its R-value. Insulation is designed to stop the flow of heat, says Roofer Lexington KY . The more heat the insulation stops, the higher the R-value of that insulation.

When compared to fibreglass batt insulation, spray foam insulation has a higher R-value at a given thickness. In other words, 2 inches of spray foam will insulate your roof better than 2 inches of fibreglass batts.

Cellulose fill, either blown-in or applied by hand, also has a higher R-value than fibreglass batts at the same thickness. But, again, the R-value of spray foam insulation is almost twice as high as cellulose fill insulation of the same thickness.

As important as R-value is in how well insulation works, it is not the only thing to consider when choosing the best roof insulation. Moisture will cause both fibreglass batts and cellulose fill to lose R-value. Even slight moisture, that you can’t see or feel, can reduce the R-value of fibreglass batts.

Neither fibreglass batts or cellulose fill insulation can seal every gap in your roof. Heat can pass through the open gaps and this reduces the R-value of the insulation, although the R-values listed for fibreglass or cellulose do not take this into consideration. In other words, the actual R-value of installed fibreglass batt or cellulose fill roof insulation is lower than the listed R-value.

Spray foam insulation is not affected by moisture, says Imprimantes 3D d’occasion. In fact, it can stop minor leaks because, when it is applied, spray foam insulation spreads to fill every gap and seal your roof. Pollutants and other airborne irritants that might get through the gaps left by batts and fill are kept out by spray foam insulation.

Perhaps best of all, insulating your roof with spray foam insulation costs about the same as other insulations.

The spray foam roof insulation specialists at Foam Comfort have the experience you need to get the most from your insulation.

Don’t Let Your Roof Repairs Go Sky High

Don't Let Your Roof Repairs Go Sky High

Don’t Let Your Roof Repairs Go Sky High  !  Before you go to the expense of calling in a roofing contractor, see if you can analyze and repair your roof problem yourself. The best possible time to repair your roof problem – is as soon as you realize that you have one and if the weather is calm enough to climb up onto the roof. In fact, this could be further qualified by saying that the best and most economical way to a trouble-free roof, is to inspect the roof regularly, so that you see the problem developing.

Before you go to the expense of calling in a roofing contractor, like Santa Rosa Roofing , see if you can analyze and repair your roof problem yourself. The best possible time to repair your roof problem – is as soon as you realize that you have one and if the weather is calm enough to climb up onto the roof. In fact, this could be further qualified by saying that the best and most economical way to a trouble-free roof, is to inspect the roof regularly, so that you see the problem developing.

A leak from one dislodged tile is a small and inexpensive matter, but if you do not inspect your roof regularly, this will go unnoticed. By the time that you DO notice it, it may be because water is dripping into your spare room! This means that this whole area of the roof structure is soaked, the ceiling will need to be replaced and hopefully the flooring will recover.

Always check your roof after a wind storm, says as most roofing is not designed to withstand fierce winds. Scrutinize the tiles for cracks, splits and torn-off corners; also check for lifting. Lifting is a common cause of roof leaks, and can be easily rectified. Be aware of multiple tiles lifting, as this could be a sign that the roofing material is too old and is warping from all the weathering.

Climb into your attic/loft and ensure that any insulation that you have in your roof is not right up against the roof itself. There has to be a gap for air to circulate; also when a roof heats up and there is insulation directly behind it, this heat is thrown back into the roofing and excessive heating like this can damage and warp the roof.

Another weakness in all roofs is the flashing, says Logiciels de Conception Assistée par Ordinateur . Flashing is designed to provide a watertight junction between roof materials and structure, especially if the roof projects out or changes design (as with extension roofs). If you are installing a new roof, it is worthwhile to get the flashing ‘inspected’ as it is a common failure area.

Often the simple fact that the gutters, leading into down pipes from the roof, are blocked with leaves and twigs can cause a problem. Roofs must have adequate run off, especially in the areas which may have snow. Water trapped in the gutter will mean that it will back up the roof for a few inches and have time to seep into the edges of the roofing tiles. Not all homes have adequate perimeter protection on their roofs, although this is one good feature to ask for on a new roof.

Quite often homes incur roof leaks all at the same time (often after strong gales winds and torrential rain etc). This can mean that all contractors are busy and you have ‘stop up the leak’ until you can get help.

If you do get a leak, and you have placed buckets under the dripping water, be aware that the leak may be in a completely different place than it would seem. Locating the source is difficult, as water can run along horizontal timbers and appear to be leaking from a place that is sound. Getting up into the attic and actually looking for a wet spot on the roof decking will be an accurate way to tell.

If you can find the spot an emergency patch can be made applying roofing felt and using plastic cement to hold it until you can call in a contractor. You can also attempt to repair it yourself, if it is just a shingle that is damaged. You can carefully prize up the roof shingle by removing the three or four nails that are holding it in place; next, apply a generous coating of tar beneath the tear in question, and also coat the underside of the shingle with a with a coat of tar before putting it back in place. Add a spot of tar to each nail head. Most roofing companies advise against the ‘liquid’ asphalt repair products.

Roofs can also be temporarily repaired using roof membrane and sealants. Care must be taken to clean the roof surface first to ensure that the sealant will stick and keep the leak protected from rain etc. In fact, as long as the roof is clean and dry, the wonder of the 20th. Century – duct tape – can also be stuck onto the roof!

Don’t Let Your Roof Repairs Go Sky High Don’t Let Your Roof Repairs Go Sky High

Decorate Your Concrete : Ideas for the Do-It-Yourselfer

Decorate Your Concrete : IdeasDecorate Your Concrete: Ideas for the Do-It-Yourselfer. Decorate your home’s concrete surfaces and give your patio, porch, garage, driveway, etc. a customized and refreshing new look. Acid stains, water based stains and epoxy paints are available for do-it-yourself projects.

You can enhance your home’s existing concrete surfaces using acid stains, water based stains , epoxy paints , and scoring techniques. If you’re tired of looking at dull gray concrete, says Driveway Seattle, there are some fairly easy projects for the serious do-it-yourselfer to give your concrete a refreshing new look. Or perhaps you plan to have some new concrete installed but you don’t want plain gray concrete. Decorative concrete work costs double to triple that of regular concrete and many people simply can’t afford it. There are inexpensive ways to decorate concrete after it has cured without having to pay skilled tradesmen.

Acid based concrete stains are becoming more and more popular for coloring concrete surfaces. They chemically react with the cementitious material to produce permanent color with variegated or mottled appearance like that of marble. This results in a natural, elegant looking surface. Acid stains are available in 8-10 different colors, mainly brown, green, and reddish earth tones. The cost is normally $60-$70 per gallon which covers 300-400 square feet. A coat of clear concrete sealer when you’re finished really brings out the colors and beauty of acid stains.

Water based concrete stains are an alternative to acid stains and are much more user friendly because they’re much less toxic. These stains don’t chemically react with the concrete; they are absorbed into the surface pores and act like a dye. The big advantage of water based stains is the wide array of colors available. You can find just about any color in the spectrum and create a more vibrant and consistent appearance. They also normally cost about $60-$70 per gallon which covers 300-400 square feet.

If you want to venture beyond the basic staining of concrete, consider using some scoring techniques to create patterns on the surface. You can make your concrete look like a tile floor for example, says Code postal Lyon . It’s up to your imagination. An angle grinder with a 4 inch grinding or cutting wheel is the ideal tool for this. The important thing to remember when scoring is to draw the pattern on the concrete first and make sure you’re satisfied with the way it looks because scoring is irreversible. Most people don’t own an angle grinder but you can rent one at almost any tool rental shop.

Epoxy paints make an excellent coating for garage floors and basement floors. Many commercial floors have epoxy coatings because of their durability and resistance to chemical spills as well as their appearance. In recent years, however, it has become very popular for residential use with an increasing availability of different colors. This is not a difficult project, but the key to successful application is surface preparation. Epoxy paints have also become available in a water based form making it safe for the do-it-yourselfer and ideal for indoor applications. They cost a little more than stains. For a 400 square foot garage, you’ll spend about $200 for the materials needed for this project.

Decorate Your Concrete : Ideas

Creative Concrete Stamping

Creative Concrete StampingCreative Concrete Stamping.  Stamping concrete is a great way for you to imitate the look and fee of authentic stone, brick, or pavement without having to spend as much. There are rubber patterns that create the impression of natural stone for this purpose. There are also ready-made patterns for such materials such as brick and cobblestone, however sometimes they can look artificial. One way to avoid this is to create your own patterns to be used in stamping concrete. If you can learn this you will soon find your inventory stock filled with varied patters that can be used for your various concrete stamping projects.

1. Be Innovative

You may even use design ideas you find around your home, says Concrete Jacksonville FL . For example, you could use an Indonesian batik design block. As long as it can make an impression on wet cement, and does not stick to the finished product, it will do. In good design, there are no limits to the imagination. So look around your area, you might even find an appealing pattern somewhere in your own home! You could consider looking at your garage, your attic, or even your uncle’s vacation gifts for potential stamp impressions.

2. Stamping

Commercial stamping produces great imitations, says Code Postal Lille . Sometimes, however, stampers are just overkill. You can bring out the beauty of concrete by being discreet at times with your stamping. You could use stamps that litter around your home, a batik woodblock or even a part of an auto transmission. Anything can be used to stamp the concrete as long it doesn’t stick and ruin the finished surface. It also has to be durable. A commercial stamp is perfect for improving a plain slab on concrete. You could also use this type of stamp if you desire a professional, standard looking concrete stamping.

3. Creative Stamping

Creating your own stamp tool is can be innovative and fun. You could even use a salvaged part from an old ceiling to create decorative stamp! When stamping on concrete, make sure you understand the risks this procedure entails. Commercial concrete stamps are designed to work well, and are engineered to be as easy to use as possible. They often leave a clean impression. If you were to use your own stamps made of everyday stamp-worthy items, remember that there is a risk that the concrete could be ruined. Commercial stamps are designed to consistently pull free from the concrete; this may not be the case with home-made ones.

– Even slabs with a deep-cut pattern must be jointed so that cracking can be controlled
– Divide the stamped concrete by using sawed joints
– Order correctly slumped concrete
– Lay out stamps before the concrete arrives
– Do as little hand tooling as possible
– Order proper amounts of concrete

Concrete stamping is neither for the inexperienced nor the faint of heart. For those who would like to learn this do-it-yourself art, learning concrete stamping is possible. For the hobbyists, masons, and even for those who just wish to make their homes better, this will truly be a worthwhile undertaking.

Creative Concrete Stamping

Do It Yourself Landscape Design – Where To Begin

Do It Yourself Landscape DesignDo It Yourself Landscape Design – Where To Begin. Here’s one answer to an all too common home landscaping question. How do I start my design? Where do I begin?

There’s an old saying that states something like – “Getting Started Is Half Finished”. And so many times I find this to be true as I see do it yourself landscapers struggle to find their initial design idea. However, once they establish a framework of necessary design elements, it usually goes pretty smooth from there.

It’s not surprising that the most common landscape design question that I get is – “where do I begin?” or “how do I start my design?”. I know it can be difficult. And especially if you don’t have a vision for your design.

So where do you begin? How do you start your landscape or garden design?

While every design is different and every designer follows a set of rules and principles, I find that most do it yourselfers all have the greatest success from using the same starting point. Begin by laying down any paths, driveways, access routes, or walk areas that might be needed. And also create access to any areas that you may plan on creating. In many designs, this will help to establish a framework that you can simply design around.

Of course, this won’t be applicable in all designs as many don’t require any access or travel. So take and use this advice where and if you can.

Paths and walkways can accomplish many functions in your landscape or garden , explains Philadelphia landscaper . Their main function, of course, is to create a designated space for people to walk on.

However, in design and as an aid to design,says Codes postal Marseille  their function could be to guide your visitors to, through, or away from some other area in the garden. Also, they’re a great way to break up a vast expanse of lawn, meadow, or bed area.

First, let’s look at walkways, paths, and such as necessary elements.

Walkways are needed to guide visitors or yourself to and from another area. Observe that almost every home has a walkway leading to the front door, which is, of course, where most folks want to invite guests to come. So walks, whether refined (brick, flagstone, etc.) or primitive (gravel, mulch, etc.), are necessary to “guide” or “lead” visitors to, through, or away from an area.

So where are the necessary areas where you need other walkways or access? Maybe from the back door to the alley where you dump the trash. Or from the house to the pool area. Or from the pool area to the kids play area or the outdoor cooking area. You get the picture.

In a design sense.

Establishing walk, drive, and access areas will in turn help to create borders and boundaries. Once you have your walkways laid out, you can simply design a lot of the landscaping around them. The same goes with driveways and parking areas as well. You can plant beds on either or both sides of a walk or use a walkway as an edge to create borders.

Keep it interesting if you can.

If you were to, for instance, plan to place a sitting area at the back of the garden. Of course you would need some type of path for you and your guests to get there. However, instead of plotting a straight path, why not create a winding tour through other interesting areas of the garden on the way there?

Curves and winding paths do more than just create interest. They can also create an illusion of more space, distance, and travel. This is especially useful in creating small gardens and landscapes.

Once you lay down walkways, driveways, and access areas, you’ll have a good starting framework for the rest of the design. Now, simply design around them.

How Vacuum Cleaners Work

How Vacuum Cleaners WorkHow Vacuum Cleaners Work. The are many different types of vacuum cleaners and carpet cleaning machines but they all work by using the same principal or idea. A vacuum is created in a tube or system and air is drawn into the system through a filter which catches debris and then the air is diffused from the unit out of an exhaust.

The residential upright vacuum cleaner uses the suction principal combined with a spinning brush at the suction opening which is located on the bottom of the vacuum cleaner. As the brush, which is commonly known as a beater bar, spins at a high rate of speed this beats the carpet and pushes and debris toward the suction opening. Once the debris has reached the suction opening air forces the debris into a filter bag which catches the debris but lets the air pass through. Once the air moves passed the filter bag it is expelled through an exhaust vent usually located on the handle box unit of the vacuum cleaner. Residential vacuums are given this name because they usually have one motor that runs the whole vacuum cleaner. This motor spins the brush and also operates the suction fan, explains Carpet cleaners Charlotte NC . Due to increased stress on one motor these types of vacuum cleaners do not have the longevity of a commercial vacuum but are priced relatively low.

Commercial vacuum cleaners work on the same principal as residential vacuum cleaners but are built for abuse and constant operation. Commercial vacuum cleaner parts are usually readily available and can be replaced by a vacuum cleaner technician, says Vin du Languedoc . Most commercial vacuum cleaners utilize two motors, one running the beater brush and the other running the suction fan or fans. These types of vacuums also utilize that latest technologies by using circuit boards to distribute the power to the vacuums two motors only when needed. On some newer commercial vacuum cleaners when the suction wand is used the beater brush motor will turn off or divert extra power for suction utilizing the entire motor potential of the vacuum cleaner.

Wet dry vacuums work on the same vacuum suction principal but extra safeguards must be put in place so that water does not come in contact with any electrical components or the motor. Wet dry vacuum cleaner motors are usually positioned on top of a debris canister and air is drawn in through the hose and up through the motor to an exhaust vent positioned on top. If water starts to reach the motor at the top of the canister a floating ball will close of the opening into the motor saving the motor from water damage. All on and off switches and electrical components on wet dry vacuums are sealed to prevent water penetration.

Cyclonic vacuum cleaners use high powered motors to create a vortex in the vacuum which creates suction. A beater bar pushes debris into the suction tube which is then drawn up into a sealed canister. Once in the canister the debris is moved toward the outer walls using centrifugal forces. The debris then slows down and is dropped into the bottom of the canister by utilizing gravity. Most cyclonic vacuums don’t use filter bags but sometimes this can compromise air quality because of escaping dust particles.

These days different types of vacuum cleaners are made for a specific purpose. It is recommended that you purchase a vacuum that fits it’s duties. If you plan to use your vacuum cleaner multiple hours everyday of the week it is not advisable to buy a residential vacuum cleaner. You will save money up front but most residential vacuums will probably not hold up over time and you will have to replace it faster. If wet floors are an issue then your best bet is a wet dry vacuum, most upright dry vacuums can stand some water but it will effect the performance of your vacuum cleaner over time.

Cleaning Your Own Carpeting

Cleaning Your Own CarpetingCleaning Your Own Carpeting. Cleaning your own carpet can be a great way to save money. If not done properly however you can end up with quite a mess. This article will give you some tips on using a carpet cleaning rental on your home’s carpets.
The first thing you need to do is find a good carpet cleaning machine. You can find them at most home improvement and grocery stores. Look for one in good condition that isn’t too beat up or old. The older the machine, the weaker the vacuum and water pump probably is. Find a machine in good condition and also purchase the carpet cleaning shampoo that is sold with the machines. Do not even think about using dish soap or any other homemade concoction.
The first step, once you get the machine home is to thoroughly pre-vacuum your carpet. Do not overlook this step because soil is much easier to remove when it is dry, tells  Carpet cleaner Buffalo NY  . Go over the carpet in several different directions, taking your time.
The next step is where I will differ from the directions on the carpet cleaning machine. They usually want you to fill the machine with a shampoo solution. This means that you are rinsing with the solution and you will leave a lot of residue. Instead, mix the cleaning solution in a separate pump-up sprayer. You can find one gallon garden sprayers at any home improvement store. Now spray the carpet evenly with the cleaner. Do not over wet the carpet, spray the solution evenly and then let it dwell for 5 to 10 minutes. Dwell time will allow the solution to break down and absorb the soils.
Next, fill the carpet cleaning machine with plain warm water, says modifier stl freecad . After letting the solution dwell, you will make a pass over the carpeting to rinse the cleaning solution out. If your carpet is heavily soiled or you used a lot of cleaning solution, you may need to make two passes over the carpet. Your goal here is to remove as much of the cleaner as possible in order to leave the least amount of residue.
Finally it is time to dry your carpets. The quicker you get them dry, the less likely it is that spots will return and the less likely you are to get water marks. Turn your ceiling fans on and get out any portable fans you have and aim them at the carpet. If it is a nice dry day, open your windows or doors. The more airflow you get to your room the better.
Well, that’s it. That’s all there is to it. Just remember to take your time and do not take shortcuts. Follow these simple steps and you can easily clean your own carpet.

Organic Landscaping : Elements of Gardening

Landscaping-Austin.com Organic gardeningOrganic landscaping in the truest sense, like by Landscaping Austin Texas , means gardening without the use of any chemical substances, may they be in the form of fertilizers, pesticides, growth enhancers, etc. Some people think that if they use only small amounts of chemical fertilizers they still are producing organic. But they are wrong. Let’s tackle some of the misconceptions and issues that surround organic gardens.

Don’t get us wrong, organic gardens don’t mean just leaving them to nature. It does need fertilization and pest management as well. However, you will use materials, techniques or approaches that are truly organic.

Fertilizers

When it comes to fertilizers, for example, organic gardens obviously need fertilizers that are either plant or animal in origin and not petroleum or chemical based as most synthetic fertilizers are made of. So this means, organic gardens will have to rely on composts, animal manures, etc to provide added nutrients to the soil that the plants needs for growth. It’s a good thing really, natural based fertilizers is less damaging to the soil in the long run that synthetic ones.

One of the many tips an expert organic grower will give you is that importance of maintaining a healthy soil. Some studies have found out that soils , not treated with any chemical or synthetic fertilizers or herbicides, grow plants that attract less pests. There are several ways to protect your soil. Covering it with vegetation or mulch will protect the soil surface from unnecessary damage from excess sun exposure and erosion from winds and rains. Remember that the top layers of the soil contain the living organisms that plants needs.

Pests

At times, organic gardens are also beleaguered by pests and you need to provide some sort of support explains fonction matlab  . Or else , aphids, worms, etc can destroy your plants easily . There a number of effective alternatives for commercial chemical fertilizers. Some are readily available in your own kitchen which makes them really convenient.

Garlic and peppers for instance can be utilized as a spray against common pests. Extracts from the neem tree is also a great weapon against leaf eating, stem boring, or flower devouring pests. Also, you should note that spiders, ladybugs, and lacewings are three of the many insects that are on your side. These insets are natural predators of aphids, worms, larvae, and other pests so treat them nicely.

Another way to manage the pests in your garden is by thinking ahead. When you planted your plants, you could also place along side them plants that are natural repellants of insects such as marigolds which are very effective against nematodes.

Everything about an organic landscaping should revolve around nature.

Sometimes, it is nice to view organic way of gardening as a means where all of us  can contribute to the protection of nature by helping minimize the use of pesticides and chemical fertilizers that are harmful to the environment. May it be a flower garden, your lawn and shrubs, a vegetable patch ( using emondage ), or even a fruit and herbs garden, as long as you incorporate organic techniques you are helping build a better future for the next generation.

These are only a few elements that you will have to internalize when start your own organic garden. Just remember that organic gardening is a technique where emphasis is on the interaction of living organisms.

Getting Started on Organic Gardening

organic gardeningOrganic gardening : more and more people are getting into organic gardening because it is more environment-friendly, more healthy, a wonderful pastime and can help them save money by having all the crops they need in the backyard. If you are planning to have their own organic garden, here are some helpful tips for you:

1. Decide the crops that you want.

Since you are into organic gardening, it is best to if you start with seeds first. Today, there are so many available seeds in most groceries and markets. But, you cannot just grab a pack of seeds without considering if it will grow in your environment. For starters, it is best to stick with vegetables and beans to try what is suited for your site condition. First determine which are the plants suited for the condition of your site. Then purchase other seeds that you want to grow.

2. Prepare the proper containers.

In organic gardening, there is no need for expensive and special containers. As long as these are tapered, then it would do your plant good. When you decide to go into organic gardening, check out your kitchen first. Find old yogurt containers, empty juice/milk cartons, tubes of potato chips, cans of sauces and juices. And slightly damaged pails or dipper. Clean then up and start filling them with clay and other organic matter to prepare for seed planting.

If you don’t have any of the mentioned containers, you can always buy in the nearest supermarket nut make sure that these have tapered sides so the crop can easily slip out. Aside from containers that are at least 3 inches deep, other container options for you include flats or shallow trays. But these are not advisable if you plan to plant two or more kinds of plants . Because the roots may be tangled and would lead to the death of the crop.

Make sure that the containers are very well cleaned using lukewarm water dashed with chlorine bleach to ensure that the germs are killed inside, tells Formation freecad . After washing, leave it on the open air to let it dry. (TIP: If you can let it dry directly under the sun, it will be best because all the residues will be removed.)

3. Be sure to have ready packets of planting mix.

Planting mixes help seeds to sprout very well that is why you should always have extra packets for your organic gardening. It is best if you use planting mixes that are sterile because they are safe for your plants and for you as well.

4. Label each container properly.

Since seeds look alike when they sprout, it is best if all the containers are labeled properly. Aside from making it easy for you to identify which is which, labeling is also crucial to avoid planting the same seed over again.

5. Let there always be light.

If you are into organic gardening, make sure that there is plenty of air and light available. If natural sunlight is not available in your area, try to create a makeshift light source such as a fluorescent light bulb or tube that can be brought in most grocery and hardware stores. By Landscaper San Jose , We make sure that we place them properly so the sprouts can get all the light they need to grow healthy.

Do-It-Yourself Carpet Cleaning Tips

carpet-cleaning-lakeland-flDo-It-Yourself Carpet Cleaning Tips : keeping your carpet clean and looking new is no longer an easy job.

Remember what your brand new carpet looked like when you first had it installed? Frustrated that only a short time later it looks like it needs to be replaced again?

Regular upkeep is vital to the life of your carpet. By vacuuming your carpet weekly and not allowing shoes to be worn in your house, you can extend the life of your carpet by five years or more. Vacuuming regularly keeps dirt and grime from becoming ground in to the carpet fibers. Allowing only socks or slippers on your carpet keeps it from becoming soiled by hard to remove stains such as mud and oils.

If your carpet does become stained or overly dirty, Carpet cleaning Lakeland  describes numerous homemade products and easy carpet cleaning tips that you can use to make it look new again.

To get the most wear out of your carpet, use the following do-it-yourself carpet cleaning tips.

When cleaning the entire carpeted area, always use a warm water solution. The warm water allows the grime and oils to be broken down more quickly and completely. For the cleaning solution you can use any of the numerous commercial products available but a simple mix of water and vinegar works just as well. The white vinegar will pull residue from the fibers making your carpet softer and cleaner.

For stains, there are numerous treatments. Club soda works great on red wine stains. Brake cleaner works great on tough food stains and WD40 works great on oil or grease spots.

To use brake cleaner, simply apply the cleaner to a cloth and then blot the stain, says quels sont vos points forts . Once the stain is removed rinse the area with a vinegar and water solution.

To use WD40, simple spray the stained area and allow the cleaner to sit for 30 minutes. Blot the area dry and then rinse it well with a mixture of dish soap and water.

The best carpet cleaning tip for removing general stains is shaving cream. Shaving cream, when applied directly to the stain and allowed to set for 30 minutes, will remove just about every type of stain. After the cream has set, gently blot it away with a dry white cloth. Be sure to rinse the area with a vinegar and water solution after cleaning.

When cleaning a carpet stain it is important to remember to blot the affected area and never rub it. Rubbing causes the particles to ground into the carpet fibers and it can also lead to the premature breakdown of those fibers.

By using these simple carpet cleaning tips you can make carpet cleaning and upkeep a breeze. Plus, you can save money on products and still have clean carpets that you are proud to show.